How to Refill a Vape: Filling Refillable Tanks and Pods Correctly
Before refilling your vape, check whether the tank or pod is designed to be refilled according to the manufacturer. This guide is intended for adults aged 18 and over in Switzerland and explains the filling process, from identifying the correct opening to preparing the device for its next use.
Key takeaways
- Check whether refilling is permitted: Follow the manufacturer's specifications. Do not open or refill prefilled pods that are not designed for refilling, or disposable devices.
- Identify the fill port: E-liquid must only go into the designated fill port, not the airflow channel. The position and closure may vary depending on the model.
- Check the liquid and fill level: Before filling, check which e-liquid the manufacturer specifies for the device. Observe the indicated fill limit and do not exceed it.
- Fill slowly and cleanly: Open the closure as instructed, place the bottle tip at the fill port and add the liquid in a controlled manner. Then carefully close the port again.
- Check before use: Wipe any e-liquid residue off the outside and check that all parts are correctly fitted. Observe the waiting time specified by the manufacturer, particularly when using a new coil.
Refilling your vape: Is my tank or pod designed for it?
Before refilling your vape, check the manufacturer's specifications and the instructions for your specific model. What matters is whether the tank or pod you are using is explicitly designed to be refilled. Appearance alone is not enough to determine this. Even models with similar names may use different pods.
Check the following points:
- Exact model name: Do your device and the tank or pod fitted to it match those described in the instructions?
- Explicit confirmation of refillability: Does the manufacturer explain whether and how you can refill it with e-liquid?
- Correct reservoir: Does this description actually apply to your pod or tank, rather than a different version?
Rechargeable does not mean refillable. A charging port only indicates that the battery can be recharged. It does not confirm that the e-liquid reservoir is designed to be opened and refilled. This distinction also matters when choosing vapes.
Prefilled pods that the manufacturer states are not intended for refilling, as well as disposable devices, must not be refilled using this procedure. Do not force sealed components open or try to create a fill port yourself.
If there is no clear information confirming that your tank or pod is refillable, do not add any e-liquid for now. First, consult the relevant manufacturer's instructions or contact the manufacturer to establish whether your specific tank or pod can be refilled.
Finding the fill port and distinguishing it from the airflow channel
Before you can refill your vape, you need to clearly identify the opening intended for this purpose. Refer to your model’s instructions: they describe or illustrate where the fill port is located and how to open it. Depending on the design, the fill port may be under a silicone flap or a tank cap, for example. Appearance alone is not a reliable guide.
Before opening anything, distinguish between these three parts:
- Fill port: This leads into the e-liquid reservoir and is the designated opening for refilling.
- Mouthpiece: This is where you draw on the device. Its opening is not necessarily a fill port.
- Airflow channel: This carries air or vapour through the device and must not be filled with e-liquid.
Only put e-liquids into the fill port specified in your model’s instructions. Even if several openings are visible under a cap, you must not simply use any of them for refilling. Check what each opening is for using the manufacturer’s illustration or description.
If you want to fill a refillable pod, remove it only if the instructions tell you to do so. The same applies to removing the mouthpiece or opening a tank cap. Do not detach any other components or use force. If you are still unsure which opening is the fill port, do not add any e-liquid yet. First, confirm which opening is intended for refilling.
Check the e-liquid and fill capacity before refilling
If you want to refill your vape, first check which e-liquid the manufacturer specifies for your device and the coil fitted in it. What matters is the specific combination of tank or pod and coil head. A recommendation for another model does not automatically apply.
The composition affects, among other things, how thin or thick an e-liquid is. It should therefore meet the manufacturer's specifications.
Before opening the e-liquid bottle, check the following points:
- Fill line: Look for a marking on the tank or pod and follow the relevant guidance in the instructions.
- Permitted fill volume: Follow the specifications for your exact tank or pod. There is no single volume that applies to all models.
- Required headspace: If the manufacturer requires an empty space above the e-liquid, this must be maintained when filling.
If a tank or pod is already partially filled, its stated capacity is not the amount you can add. Take the existing e-liquid level into account. When choosing refill pods for your device, the relevant product information and manufacturer's specifications are also the deciding factors. If clear guidance on e-liquid compatibility or the fill limit is missing, clarify these points before refilling rather than estimating the amount.
Filling a tank or refillable pod: step by step
When you want to refill your vape, place the device and e-liquid bottle on a clean, flat surface. Take your time when filling so you can keep an eye on the liquid level throughout.
- Prepare the device: Prepare the e-cigarette for filling according to the manufacturer's instructions. Only remove the pod or detach the tank from the device if instructed to do so. Keep the tank or pod stable in the specified filling position.
- Open the filling port: Open the designated cap, sliding cover or silicone tab according to the instructions. Do not use force, and set any removable parts aside on a clean surface.
- Add e-liquid slowly: Position the bottle tip at the filling port without forcing it in. Gently squeeze the bottle while monitoring the rising liquid level. Only put e-liquid into the filling port, not into the airflow channel.
- Stop at the fill limit: Stop filling at the designated mark or at the fill limit specified by the manufacturer. Do not fill beyond this point. Carefully withdraw the bottle tip and set the bottle down.
- Close securely: Close the filling port according to the instructions. Make sure the closure is correctly seated and fully closed. Then close the e-liquid bottle as well.
If you have used pods or leftover e-liquid to dispose of, you can find guidance in our guide How to dispose of vapes correctly in Switzerland: batteries, pods and e-liquids.
After refilling: What to check before your next use
Once you have finished refilling your vape, first check that the fill port is properly closed. Silicone plugs, sliding covers or screw caps must be fully closed according to the manufacturer’s instructions. Make sure nothing is misaligned and that any visible seal is correctly seated. Do not force anything into place.
If you removed the pod to refill it, reinsert it according to the instructions. Check that it is correctly aligned and sits securely in its designated slot. How the pod is held in place or clicks into position depends on the device.
Observe the waiting time and check for leaks
Before using the device again, observe any waiting time specified by the manufacturer. Especially with a new pod or coil head, the e-liquid first needs to saturate the wicking material sufficiently. There is no universal waiting time in minutes: follow the instructions for your specific pod or coil head. If no clear guidance is given, consult the manufacturer’s information to confirm how to prepare it rather than guessing a waiting time.
Before taking your first puff, check for visible e-liquid leaks at the fill port, on the tank or around the pod. If you notice a leak, do not simply continue using the device. If you experience a burnt taste during use, stop using it as well and consult the manufacturer’s instructions or contact the manufacturer to find out what to do next.
Conclusion
If you want to refill your vape, first check the manufacturer’s instructions to confirm whether the tank or pod is designed to be refilled. Prefilled pods without a refill function and disposable devices are not refillable: they must not be opened for refilling.
When refilling, use the designated filling port, a suitable e-liquid and the permitted fill volume. The liquid belongs in the tank, not in the airflow channel. Filling carefully and then closing the tank or pod securely are the core steps. Before using the device again, follow the manufacturer’s instructions, particularly when using a new coil head or pod.
This guide is intended for adults aged 18 and over. Nicotine is addictive.
Frequently asked questions
How can I tell whether my vape is refillable?
Check the manufacturer's instructions for your specific tank or pod. They must explicitly state that it is designed to be refilled and explain how to do so. A visible opening alone is not a reliable indicator. Do not open prefilled pods that are not designed for refilling or disposable devices, or attempt to modify them for refilling.
Can every vape with a rechargeable battery also be refilled?
No. A rechargeable battery only means that you can charge the battery again. Whether you can also refill it with e-liquid depends on the tank or pod. Check both functions separately in the instructions: a charging port does not automatically mean that the e-liquid reservoir is refillable.
Where should I add vape liquid to keep it out of the airflow channel?
Only add liquid through the filling port identified by the manufacturer. The airflow channel is not intended for filling; its position may vary depending on the model. Refer to the diagram in the instructions. Position the bottle tip at the filling port and fill slowly without applying pressure.
Which e-liquid and fill level are suitable for my refillable pod?
Use an e-liquid that the manufacturer specifies as suitable for your pod and the coil head fitted in it. Observe the stated fill limit or the marking on the reservoir. When refilling, remember to account for any liquid already inside: the maximum capacity is not the amount you can add each time.
How long should I wait after filling before using my e-cigarette?
Follow the waiting time specified in the manufacturer's instructions; there is no single waiting time that applies to all devices. The wicking material needs time to become saturated with liquid, especially in a new pod or coil head. If no waiting time is specified, check with the manufacturer before using the device.