PG and VG in E-Liquid: Differences and Device Compatibility
The difference between PG and VG mainly concerns the liquid properties of an e-liquid and, in turn, whether it is suitable for the device being used. This also applies to nicotine salt e-liquids. This guide is intended for adults in Switzerland and explains the role of each ingredient, how to read mixing ratios and why the manufacturer's specifications are crucial when choosing an e-liquid.
Key takeaways
- PG stands for propylene glycol, and VG for vegetable glycerine. Both form the liquid base of many e-liquids; PG also acts as a carrier for flavourings, while VG contributes to vapour production.
- At the same temperature, VG is more viscous than PG. A higher VG content therefore makes an otherwise comparable e-liquid thicker, while a higher PG content makes it thinner.
- When reading the PG/VG ratio on the label, the order given matters. Check which proportion is explicitly assigned to PG and which to VG, rather than assuming a fixed format.
- Device compatibility depends on the manufacturer's specifications for the device and the replacement pods or coils used. The design alone is not a sufficient basis for choosing an e-liquid.
- There is no universally suitable e-liquid mixing ratio. Match the composition to your system's intended operating conditions.
PG and VG in e-liquid: What do the abbreviations mean?
PG and VG refer to two substances that are among the basic ingredients of many e-liquids, including nicotine salt e-liquids. Together, they often form what is known as the base. These abbreviations therefore refer to components of the liquid, not to flavours.
PG stands for propylene glycol. The abbreviation comes from the English term “Propylene Glycol”. Propylene glycol is a colourless, largely odourless liquid. On a label, the substance may be listed by its full name or by the abbreviation PG.
VG stands for vegetable glycerin. This abbreviation comes from “Vegetable Glycerin”. Glycerin is also known as glycerol. The word “vegetable” describes the origin of the raw materials used in its production. VG is also a colourless, largely odourless liquid.
Flavourings are distinct from the base. They are used to create a particular flavour, such as fruit or tobacco notes. PG and VG, by contrast, do not describe these flavour profiles. Two e-liquids with the same PG/VG base can therefore taste different.
This distinction helps when reading a product description: PG and VG identify the base ingredients, while flavour descriptions indicate the flavour profile. The PG/VG ratio, in turn, refers to the proportions of the two base substances—not the ratio of different flavourings to one another.
What roles do propylene glycol and VG play in e-liquid?
Propylene glycol (PG) and vegetable glycerine (VG) are the carrier liquids in an e-liquid. They form the base in which flavourings and, where present, nicotine are dissolved or dispersed. Both substances also contribute to aerosol formation: when heated at the atomiser, components of the e-liquid enter the gas phase. As they subsequently cool, fine liquid droplets form. The visible cloud is commonly called vapour, but it is an aerosol.
PG plays an important role as a flavour carrier. Many flavouring substances dissolve readily in it and can be distributed throughout the e-liquid base. However, flavour perception does not depend solely on the proportion of PG. The flavour formulation and the device used also influence taste. A higher PG content therefore does not automatically mean a more intense or more balanced flavour.
VG also carries flavourings and is particularly known for its effect on visible vapour density. Under comparable conditions, a higher VG content often produces a denser aerosol cloud. This does not indicate quality: more visible vapour tells you neither how carefully an e-liquid was manufactured nor whether it is suitable for a particular device.
The roles of these carrier liquids should be distinguished from the form of nicotine used, such as nicotine salts. This separate aspect is explained in the article Nicotine salts or freebase nicotine: differences in e-liquids explained.
How does the PG/VG ratio affect viscosity?
Viscosity is a measure of how thick a liquid is. Low viscosity means it flows more easily; at high viscosity, it flows more slowly. Propylene glycol (PG) is thinner than vegetable glycerine (VG). This difference between PG and VG shapes the flow properties of an e-liquid.
As the VG content increases, the mixture becomes thicker, provided its composition is otherwise comparable and the temperature remains the same. A higher PG content, by contrast, makes it thinner. The PG/VG ratio therefore provides a guide, but it is not the only factor: other ingredients and temperature also affect viscosity. A cool e-liquid is generally thicker than the same e-liquid at a higher temperature.
What does this mean for e-liquid wicking?
Inside the atomiser, e-liquid travels from the tank through openings and an absorbent wicking material, often cotton, to the heating coil. This flow supplies the area where the e-liquid is vaporised. How easily the liquid travels along this path depends in part on its viscosity.
- Thinner mixtures can flow more easily through the e-liquid channels and wicking material in comparable setups.
- Thicker mixtures replenish the coil area more slowly under the same conditions.
What matters is the interaction between the e-liquid and the atomiser design. Neither thinner nor thicker liquids are inherently more suitable. The e-liquid mixing ratio should match the device’s intended wicking characteristics; the manufacturer’s specifications provide the reference for this.
How to read the e-liquid mix ratio on the label correctly
The PG/VG ratio shown on e-liquids describes the proportions of propylene glycol and vegetable glycerine in the stated mix. What matters is not just the numbers, but also the labels that go with them. Always read each number together with its label rather than relying solely on its position on the packaging.
The following examples show why the order matters:
- PG/VG 30/70: This indicates a ratio of 30 percent PG and 70 percent VG.
- VG/PG 30/70: With this order, the proportions are reversed: 30 percent VG and 70 percent PG.
- 70 percent VG / 30 percent PG: Explicit labelling clearly identifies each proportion.
A standalone figure such as “70/30” is ambiguous without further labelling. Do not automatically assume that the first number refers to PG or VG. Similar designs across different labels are not a reliable basis for identifying which number refers to which ingredient either.
If the labelling is missing or difficult to read, consult the product description or the manufacturer's information. Make sure it refers to the exact liquid and variant in question.
If the information remains contradictory or incomplete, ask the retailer or manufacturer rather than guessing the ratio. For later comparison with the device specifications, you can note down both values clearly: “PG: … percent, VG: … percent”.
Device compatibility: Which manufacturer specifications matter?
First, check whether your device is designed to be refilled or uses prefilled pods only. For a system that uses prefilled pods, only the replacement pods intended for that system are suitable. You should not open and refill these pods yourself unless the manufacturer allows for this.
For a refillable device, the specifications for the exact model and the component in use are essential. Before choosing an e-liquid, check the following points:
- Device: Which PG/VG ratios or e-liquid types does the manufacturer recommend in the user manual or product description?
- Pod or coil head: Are there specific recommendations for the version you are using? A device system may support different components.
- E-liquid: Does the stated mixing ratio of the e-liquid match these recommendations? When comparing ratios, pay attention to the order in which PG and VG are listed.
Terms such as “pod system” or “starter kit” are not enough on their own to assess compatibility. Nor can a universally applicable PG/VG ratio be determined from the resistance of the coil head. What matters is the manufacturer's recommendation for the actual combination of device and pod or coil head you are using.
If specific information is missing or the guidance is contradictory, ask the manufacturer. Provide the exact model name and the pod or coil head version you are using. This helps you avoid making a choice based solely on general rules of thumb.
Conclusion
When choosing an e-liquid, the key difference between PG and VG is their viscosity: PG is thinner, while VG is thicker. The PG/VG ratio therefore affects how well an e-liquid suits its intended use in a device. There is no universally ideal mixing ratio.
The manufacturer's specifications for the particular device and the coil head or refillable pod being used are crucial. Compare these with the stated e-liquid mixing ratio and check the order in which PG and VG are listed. If suitability is not clearly specified, confirm compatibility before filling rather than inferring it solely from the device name.
Nicotine is addictive.
Frequently asked questions
What is the difference between PG and VG in e-liquid?
PG stands for propylene glycol, while VG stands for vegetable glycerine. The main difference is their viscosity: PG is thinner, while VG is considerably thicker. VG also contributes more to vapour production. Their ratio therefore affects both the consistency of the e-liquid and its suitability for the device being used.
What roles do propylene glycol and vegetable glycerine play in e-liquid?
Propylene glycol and vegetable glycerine form the base of an e-liquid and act as carriers for other ingredients. PG is used primarily as a flavour carrier, while VG contributes to vapour production and has a slight natural sweetness. The two are combined to achieve the desired viscosity and vaporisation properties of the mixture.
Does more VG make an e-liquid thicker?
Yes, a higher VG content makes an e-liquid more viscous when the rest of its composition is comparable. This affects how easily it passes through the liquid openings to reach the wick. Temperature and other ingredients also affect viscosity. The VG content alone therefore does not account for all the flow properties of a finished e-liquid.
How do I know whether the label means PG/VG or VG/PG?
Look at the stated order of the abbreviations: with PG/VG, the first value refers to PG; with VG/PG, it refers to VG. A pair of numbers without labels is ambiguous. In that case, check the product description or ask the manufacturer rather than inferring the order from the way the numbers are presented.
Which manufacturer specifications indicate the right PG/VG ratio for my device?
The key information is the recommended PG/VG ratio or suitable e-liquid viscosity for the specific device and the pod or coil head being used. Check the manufacturer's instructions and product specifications. Resistance and power range alone are no substitute for an explicit e-liquid recommendation. If none is provided, it is worth asking the manufacturer.